<div><div>The HP 2620 Switch Series provides cost-effective, flexible and ease of use for enterprise edge, SMB and branch office access layer deployments. This cost-effective Fast Ethernet switch has a robust Basic Layer 3 feature set with static and RIP routing, PoE+, ACLs, sFlow, IPv6 and requires no software licensing. The HP 2620 Switch Series can be managed with the optional HP Intelligent Management Center (IMC) Software for a single view of your entire network.<br /></div> <span> <!-- ProductFeautures here --> </span><div class="cPF"><ul><li><strong>Security</strong><br />Secure Sockets Layer (SSL): encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch. Source-port filtering: allows only specified ports to communicate with each other. Access control lists (ACLs): provide IP Layer 3 filtering based on source/destination IP address/subnet and source/destination TCP/UDP port number. RADIUS/TACACS+: eases switch management security administration by using a password authentication server. Secure shell: encrypts all transmitted data for secure remote CLI access over IP networks.</li><li><strong>Layer 2 switching</strong><br />Jumbo packet support: supports up to 9220-byte frame size to improve the performance of large data transfers. VLANs: provide support for 512 VLANs and 4,094 VLAN IDs. IEEE 802.1v protocol VLANs: isolate select non-IPv4 protocols automatically into their own VLANs.</li><li><strong>Layer 3 routing</strong><br />Routing Information Protocol (RIP): provides RIPv1 and RIPv2 routing. Static IP routing: provides manually configured routing; includes ECMP capability.</li><li><strong>Connectivity</strong><br />Auto-MDIX: provides automatic adjustments for straight-through or crossover cables on all 10/100 and 10/100/1000 ports. IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras. IPv6: IPv6 host: allows the switches to be managed and deployed at the edge of an IPv6 network. Dual stack (IPv4/IPv6): provides a transition mechanism from IPv4 to IPv6; supports connectivity for both protocols. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the network. IEEE 802.3at Power Over Ethernet Plus: provides up to 30 W per port to IEEE 802.3 for PoE-/PoE+-powered devices such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/tilt/zoom security cameras.</li><li><strong>Resiliency and high availability</strong><br />IEEE 802.1s Multiple Spanning Tree: provides high link availability in multiple VLAN environments by allowing multiple spanning trees. External redundant power supply: provides high reliability. IEEE 802.3ad Link Aggregation Protocol (LACP) and HP port trunking: support up to 24 trunks, each with up to 8 links (ports) per trunk. SmartLink: provides easy-to-configure link redundancy of active and standby links.</li><li><strong>Management</strong><br />Multiple configuration files: stores easily to the flash image. Dual flash images: provides independent primary and secondary operating system files for backup while upgrading. sFlow (RFC 3176): delivers wire-speed traffic accounting and monitoring configured by SNMP and CLI with three terminal encrypted receivers. Friendly port names: allows assignment of descriptive names to ports. Port mirroring: enables traffic on a port to be simultaneously sent to a network analyzer for monitoring.</li><li><strong>Quality of Service (QoS)</strong><br />Traffic prioritization (IEEE 802.1p): allows real-time traffic classification into eight priority levels mapped to eight queues. Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers. Rate limiting: sets per-port ingress enforced maximums and per-port, per-queue minimums. Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ.</li></ul></div> </div>