Specialized printers
Datu termināli
Svītrkodu skaneri
Svītrkodu iekārtu izejmateriāli
Svītrkodu iekārtu aksesuāri
HPE PM893 - SSD - 480 GB - hot-swap - 2.5" SFF - SATA 6Gb / s - with HPE Basic Carrier
HPE PM893 - SSD - 480 GB - hot-swap - 2.5" SFF - SATA 6Gb / s - with HPE Basic Carrier
Manufacturer
•HPE
Reference
•P44007-B21
Article
•3104709
Intrastat
•84717050
Device Type
Solid state drive - hot-swap
Capacity
480 GB
NAND Flash Memory Type
Triple-level cell (TLC)
Form Factor
2.5" SFF
Interface
SATA 6Gb/s
Features
Digitally Signed Firmware, Read Intensive
Height
7 mm
Bundled with
HPE Basic Carrier
Drive Writes Per Day (DWPD)
1
SSD Endurance
876 TB
Drive Transfer Rate
600 MBps (external)
Internal Data Rate
515 MBps (read) / 495 MBps (write)
4KB Random Read
68000 IOPS
4KB Random Write
29000 IOPS
Interfaces
1 x SATA 6 Gb/s
Compatible Bay
2.5" SFF
Power Consumption
1.22 Watt (idle) ¦ 2.45 Watt (random read) ¦ 2.45 Watt (random write) ¦ 1.71 Watt (sequential read) ¦ 2.19 Watt (sequential write) ¦ 2.45 Watt (random read/write) ¦ 2.45 Watt (maximum)
Service & Support
Limited warranty - 3 years
Designed For
HPE ProLiant DL20 Gen10 Plus (2.5"), DL20 Gen10 Plus Base (2.5"), DL20 Gen10 Plus Entry (2.5"), DL20 Gen10 Plus High Performance (2.5"), DL20 Gen10 Plus Performance (2.5"), DL325 Gen10 Plus V2 (2.5"), DL325 Gen10 Plus V2 Base (2.5"), DL325 Gen10 Plus V2 for Weka Base Tracking (2.5"), DL325 Gen10 Plus V2 Performance (2.5"), DL345 Gen10 Plus (2.5"), DL345 Gen10 Plus Base (2.5"), DL345 Gen10 Plus Entry (2.5"), DL360 Gen10 Plus (2.5"), DL360 Gen10 Plus All-NVMe Server for Software Defined Storage (2.5"), DL360 Gen10 Plus for SAP HANA Compute Block (2.5"), DL360 Gen10 Plus for Weka Base Tracking (2.5"), DL360 Gen10 Plus Network Choice (2.5"), DL385 Gen10 Plus V2 (2.5"), DL385 Gen10 Plus V2 Base (2.5"), DL385 Gen10 Plus V2 Entry (2.5"), ML30 Gen10 Plus (2.5"), ML30 Gen10 Plus Entry (2.5"), ML30 Gen10 Plus Performance (2.5") ¦ HPE SimpliVity 325 Gen10 Plus V2 Node (2.5")